Need help?Do you have a question about the Grundfos SBA 3-45 and is the answer not in the manual?
General| Product Name | Grundfos SBA 3-45 |
|---|---|
| Category | Water Pump |
| Max Head | 45 m |
| Power Consumption | 1050 W |
| Pump Type | Submersible |
| Protection Class | IP68 |
| Maximum Liquid Temperature | 40°C |
| Pump Housing | Stainless Steel |
| Inlet Screen | Yes |
| Pumped Liquid | Clean water |
| Liquid Temperature Range | 0°C to 40°C |
| Mains Frequency | 50 Hz |
| Rated Voltage | 230 V |
| Enclosure Class | IP68 |
| Insulation Class | F |
| Type of Cable Plug | Schuko |
| Phase | 1 |
| Seal Type | Mechanical seal |
| Max Flow Rate | 3 m³/h |
| Material | Stainless steel |
| Maximum Installation Depth | 10 m |
| Approvals | CE |
| Motor Protection | Thermal protection |
| Rated Flow | 2.5 m³/h |
Explains hazard symbols and statements for safety.
Covers the physical aspects of installing the pump.
Steps for safely connecting the pump to power.
Specifies the maximum permissible depth for pump installation.
Details the correct vertical orientation for SB and SBA pumps.
Defines conditions for SBA pump operation.
Explanation of SBA's dry-running protection features.
Defines the applications for which the pumps are designed.
Details on how to identify the product via its nameplate.
Troubleshooting steps when the pump fails to start or operate.
Details on operating parameters like flow rate and head.
Information on voltage, power, and current ratings.
Physical dimensions of the pumps.
To Next Page
