Grundfos SB - User Manual

SB, SBA
Installation and operating instructions
GRUNDFOS INSTRUCTIONS

Grundfos SB Specifications

General

Brand	Grundfos
Model	SB
Category	Water Pump
Language	English

Summary

General Information

Hazard statements

Summarizes potential dangers from symbols and text.

Receiving the product

Inspecting the packaging

Installing the product

Location

Guidance on selecting an appropriate installation site, considering frost and sediment.

Mechanical installation

Procedures for physically connecting and mounting the pump.

Pump position

Connecting the outlet hose or pipe

Electrical connection

Safety guidelines and procedures for wiring the pump correctly.

Starting up the product

SBA starting and stopping conditions

Conditions under which the SBA pump starts and stops automatically.

Handling and storing the product

Handling the product

Product introduction

SB pumps

SBA pumps

SBA dry-running protection

Explanation of the built-in dry-running protection for SBA pumps.

Intended use

Pumped liquids

Maintaining the product

Fault finding the product

The pump does not run

Troubleshooting steps for when the pump fails to start.

The pump runs but gives no water

Diagnosing issues when the pump operates but does not deliver water.

The pump runs at reduced performance

Frequent starts and stops

Technical data

Operating conditions

Electrical data