Need help?Do you have a question about the Grundfos SE1 50 and is the answer not in the manual?
General| Type | Submersible sewage pump |
|---|---|
| Maximum submersion depth | 10 m |
| Maximum liquid temperature | 40 °C |
| Rated voltage | 3 x 400 V |
| Enclosure class | IP68 |
| Frequency | 50 Hz |
| Voltage | 400 V |
| Inlet/Outlet Size | 50 mm |
Overview of safety precautions for handling, installation, operation, maintenance, service, and repair.
Information on appliance use by children and persons with reduced capabilities, and supervision.
Details of pump components with a list of parts and their descriptions.
Lists liquids suitable for standard cast iron pump versions: drainage, sewage, industrial water.
Lists liquids suitable for stainless steel pump versions: chemicals, corrosive water, abrasive wastewater.
Instructions on where to fix the nameplate and its importance for identification.
Details the explosion protection classifications and certifications for SE1 and SEV pumps.
Lists the standards and bodies approving the standard variants of SE1 and SEV pumps.
Outlines specific safety requirements for using explosion-proof pumps in hazardous locations.
Formal statement confirming the product's conformity with EC/EU directives.
EU Declaration of Performance detailing product type, intended use, and declared performance.
To Next Page
