Need help?Do you have a question about the Grundfos SEG Series and is the answer not in the manual?
General| Power Supply | Electric |
|---|---|
| Maximum Liquid Temperature | 40°C |
| Installation | Submersible |
| Protection Class | IP68 |
| Applications | Sewage, wastewater |
| Material | Cast iron |
| Impeller Type | Vortex |
| Frequency | 50 Hz |
| Housing Material | Cast iron |
| Impeller Material | Cast iron |
| Seal Type | Mechanical seal |
| Weight | Varies depending on model (typically 30-60 kg) |
Explains hazard warning symbols and their meanings.
Details the physical setup and mounting procedures.
Details the procedures and safety precautions for electrical connection.
Explains how to check and correct the pump's direction of rotation.
Provides instructions for the initial startup procedure.
Specifies requirements and precautions for use in potentially explosive environments.
Describes the LC and LCD controllers for managing liquid levels.
Explains the function and operation of thermal switches for motor protection.
Outlines essential safety precautions before performing maintenance.
Presents a schedule for routine inspection and maintenance tasks.
Details the procedure for checking and changing the oil in the pump's oil chamber.
To Next Page
