Need help?Do you have a question about the Grundfos 50 F Series and is the answer not in the manual?
General| Protection class | IP55 |
|---|---|
| Insulation class | F |
| Type | Centrifugal pump |
| Pump housing | Cast iron |
| Impeller | stainless steel |
| Frequency | 50 Hz / 60 Hz |
| Connection type | Flange |
| Speed | 2900 rpm |
| Liquid temperature | -10°C to +120°C |
| Voltage | 230V or 400V |
Prevent electric shock by locking the main switch to position 0.
Use RCDs and earthing for protection against indirect electrical shock.
Ensure proper wiring with reinforced insulation to prevent electric shock.
Warning about electric shock during troubleshooting; switch off power first.
Ensure no backflow through the pump when stopped to prevent electric shock.
To Next Page