Grundfos 50 F Series User Manual

English (GB)
10
Handling and storing the product
Make sure that the fuse is
dimensioned according to the
nameplate and local legislation.
Connect all cables in accordance with
local regulations.
Make sure that all cables are
heat-resistant up to 70 °C.
Install all cables in accordance with
EN 60204-1 and EN 50174-2.
WARNING
Electric shock
Minor or moderate personal injury
- Separate wires connected to supply
terminals, outputs NC, C and
start-stop input from each other and
from the supply by means of
reinforced insulation.
Observe local regulations concerning
limits for manual lifting or handling.

Grundfos 50 F Series Specifications

General

Protection class	IP55
Insulation class	F
Type	Centrifugal pump
Pump housing	Cast iron
Impeller	stainless steel
Frequency	50 Hz / 60 Hz
Connection type	Flange
Speed	2900 rpm
Liquid temperature	-10°C to +120°C
Voltage	230V or 400V