Need help?Do you have a question about the Grundfos MAGNA3 40-80 F (N) and is the answer not in the manual?
General| Maximum Head | 8 m |
|---|---|
| Liquid Temperature Range | -10°C to +110°C |
| Maximum Operating Pressure | 10 bar |
| Energy Efficiency Index (EEI) | ≤ 0.20 |
| Pipe Connection | Flange |
| Connection Size | DN 40 |
| Pump Housing | Cast iron |
| Supply Voltage | 1 x 230 V |
| Insulation Class | F |
| Approvals | CE |
| Power Supply | 50 Hz |
| Enclosure Class | X4D |
| Protection Class | I |
| Head Range | 0 - 8 m |
| Power (P1) max | 0.45 kW |
Step-by-step guide for starting a single-head pump, including initial settings.
Lists all available settings accessible via the control panel or Grundfos GO.
Recommends control modes based on system application and characteristics.
Describes the "Home" menu, its navigation, and display icons.
Instructions for setting the pump's setpoint to match system requirements.
A guided walkthrough for setting up the pump.
Configuration for duty-standby operation of two pumps.
Configuration for backup operation with two pumps for maintenance.
Details the integrated sensor and its benefits for pump control.
To Next Page