English (GB)
11
3.9.1 Connection diagram
Fig. 15 Example of terminal-connected motor with main switch, backup fuse and additional protection
Fig. 16 Example of plug-connected motor with main switch, backup fuse and additional protection
TM03 2397 3216
External switch
Fuse
RCD/RCCB
TM05 5277 3712
External switch
Fuse
RCD/RCCB
Make sure that the fuse is dimensioned according to
the nameplate and local legislation.
Connect all cables in accordance with local
regulations.
Make sure that all cables are heat-resistant up to 75
°C.
Install all cables in accordance with EN 60204-1 and
EN 50174-2:2000.
To Next Page
Loading...
