Grundfos MAGNA3 40-80 F (N) - Power Supply Connection

English (GB)
9
3.9 Connecting the power supply
Terminal-connected versions
Step Action Illustration
1
Remove the front
cover from the
control box.
Do not remove the
screws from the
cover.
TM05 2875 3416
2
Locate the power
supply plug and
cable gland in the
small cardboard box
supplied with the
pump.
TM05 2876 3416
3
Connect the cable
gland to the control
box.
TM05 2877 3416
4
Pull the power
supply cable through
the cable gland.
TM05 2878 3416
5
Strip the cable
conductors as
illustrated.
TM05 2879 3416
6
Connect the cable
conductors to the
power supply plug.
TM05 2880 3416
7 mm
20 mm
Min. Ø 7 mm
Max. Ø 14 mm
7
Insert the power
supply plug into the
male plug in the
pump control box.
TM05 2881 3416
8
Tighten the cable
gland.
Fit the front cover.
TM05 2882 3416
Step Action Illustration