Need help?Do you have a question about the Grundfos MAGNA1 Series and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Type | Circulator pump |
| Control Panel Position | Integrated |
| Series | MAGNA1 |
| Weight | Varies by model |
| Power Supply | 3 x 380-480 V, 50/60 Hz |
| Pump Housing | Cast iron |
| Connection Type | Flanged |
| Voltage | 380-480 V |
| Material | Cast iron, stainless steel |
| Temperature Range | -10°C to +110°C |
| Ambient Temperature Range | 0°C to +40°C |
Details the systems where the MAGNA1 pump is designed for circulating liquids.
Specifies the suitable types of liquids for the MAGNA1 pump and their properties.
Details temperature limits, system pressure, test pressure, ambient temperature, and sound pressure level.
Provides guidance on preventing frost damage to the pump.
Information on insulating shells for pumps to reduce heat loss.
Guidance on setting the minimum discharge pressure relative to non-return valves.
Explains the information provided on the pump's nameplate.
Lists the tools recommended for installation and maintenance.
Safety precautions and methods for lifting the pump correctly.
Instructions for installing the MAGNA1 pump in various system configurations.
Guidelines for correct pump orientation to ensure proper operation and cooling.
Details on positioning the control box for optimal cooling and functionality.
Step-by-step guide for repositioning the pump's control box.
Specifies the required supply voltage and frequency for the pump.
Instructions for safely connecting the pump to the power supply.
Instructions for assembling and disassembling the ALPHA-plug connector.
Diagrams illustrating the correct electrical connections for the pump.
Details the control panel, Grundfos Eye indicator, and pump setting light indicators.
Explains different pump performance settings and their relation to system type.
Guidance on selecting the appropriate control mode based on system application.
Interprets the status indications of the Grundfos Eye for fault diagnosis.
Procedures for resetting fault indications and troubleshooting steps.
Product numbers for insulating kits for air-conditioning and cooling systems.
Information on blanking flanges for twin-head pump maintenance.
Details on counter-flange kits for cast-iron pumps, including specifications.
Details on counter-flange kits for stainless-steel pumps, including specifications.
Specifications for counter flanges for MAGNA1 DN 80 and DN 100 pumps.
Product numbers and dimensions for adapters to adjust port-to-port lengths.
Details on electrical, environmental, pressure, and performance specifications of the pump.
Table of dimensions for twin-head MAGNA1 pumps in flanged versions.
To Next Page
