Need help?Do you have a question about the Grundfos MAGNA1 C Series and is the answer not in the manual?
General| Head | Up to 12 m |
|---|---|
| Maximum Operating Pressure | 10 bar |
| Power Supply | 1 x 230 V, 3 x 400 V |
| Insulation Class | F |
| Type | Circulator Pump |
| Pump Housing | Cast Iron |
| Approvals | CE, EAC |
| Connection Type | Flanged or threaded |
| Material | Cast Iron |
| Weight | Varies depending on model |
Information about potential hazards and safety precautions.
Instructions for checking the product against the order and installation site.
Guidelines and safety instructions for lifting the pump.
Guidance on selecting an appropriate and safe installation location for the pump.
Steps and considerations for physically installing the pump into the piping system.
Correct and incorrect orientations for installing the pump with horizontal motor shaft.
Ensuring proper cooling by positioning the control box horizontally.
Precautions for fitting the pump head to the pump housing correctly.
Detailed steps for safely changing the orientation of the pump's control box.
Details on the required supply voltage and frequency for the pump.
Illustrations and explanations of electrical wiring configurations for the pump.
Step-by-step guide for connecting plug-connected pump versions to power.
Step-by-step guide for connecting terminal-connected pump versions to power.
Instructions for connecting a digital input for external control.
Instructions for connecting the fault relay output for monitoring.
Steps for starting up a single-head pump after installation.
Important considerations for starting up twin-head pumps.
Summary table of pump settings, curves, and their functions.
Guidance on choosing control modes based on system application requirements.
How to select and set the pump's control function using the operating panel.
Interpreting the Grundfos Eye indicator lights for pump status and faults.
A table detailing common faults, their causes, and corrective actions.
To Next Page