Need help?Do you have a question about the Grundfos MAGNA1 and is the answer not in the manual?
General| Pump Type | Circulator Pump |
|---|---|
| Flow Range | 0.5 - 12 m³/h |
| Maximum Flow | 12 m³/h |
| Maximum Head | 10 m |
| Maximum Liquid Temperature | 110°C |
| Maximum Operating Pressure | 10 bar |
| Power Supply | 230 V, 50/60 Hz |
| Enclosure Class | IP42 |
| Insulation Class | F |
| Pump Housing | Cast Iron |
| Installation Length | 180 mm |
| Series | MAGNA1 |
| Energy Efficiency Class | A |
| Liquid Temperature Range | 2°C to 110°C |
| Approvals | CE, EAC |
| Ambient Temperature Range | 0 .. 40 °C |
Describes hazard, warning, caution symbols and their meanings for safe operation.
Explains safety symbols marked directly on the pump unit for user awareness.
Instructions for checking product integrity, voltage, and frequency against order requirements.
Lists all components included in the pump's packaging for various models.
Provides critical safety guidelines for safely lifting and handling the pump unit.
Step-by-step guide for electrical connection of terminal and plug-connected pump versions.
Outlines the procedure for safely starting the pump after system filling and venting.
Provides troubleshooting steps, corrective actions, and warnings for common pump faults.
To Next Page