Grundfos MAGNA3 40-80 F (N) - Alarm and Warning Configuration

English (GB)
37
"
$ODUPDQGZDUQLQJVHWWLQJV
"
Navigation
"
+RPH
" > "
6HWWLQJV
" > "
*HQHUDOVHWWLQJV
" > "
$ODUPDQGZDUQLQJ
VHWWLQJV
"
"Settings"
•"'U\UXQQLQJ"
•",QWHUQDOVHQVRUIDXOW"
•",QWHUQDOIDXOW"
"
'U\UXQQLQJ
"
•"(QDEOH"
•"'LVDEOH"
The dry running detection is disabled by default on all pumps
from production code 1529. The production code is on the
nameplate. Enable the dry-running function, if there is a risk of
dry running.
"
,QWHUQDOVHQVRUIDXOW
"
•"(QDEOH"
•"'LVDEOH"
In case of a sensor problem related to the quality of the liquid, the
pump is able to continue operation with satisfactory performance
in most situations. In such situations, you can disable ",QWHUQDO
VHQVRUIDXOW".
"
,QWHUQDOIDXOW
"
•"(QDEOH"
•"'LVDEOH"
If the real-time clock is out of order, for example due to a dead
battery, a warning is shown. You can disable the warning.
"
'HOHWHKLVWRU\
"
Navigation
"+RPH" > "6HWWLQJV" > "*HQHUDOVHWWLQJV" > "'HOHWHKLVWRU\"
"
'HOHWHKLVWRU\
"
•"'HOHWHRSHUDWLQJORJ"
•"'HOHWHKHDWHQHUJ\GDWD"
•"'HOHWHHQHUJ\FRQVXPSWLRQ".
In this menu, you can delete data from the pump, for example if
the pump is moved to another system or if new data are required
due to changes to the system.
Setting:
1. Select submenu and press [OK].
2. Select "<HV" with or and press [OK] or press to
cancel.
"
'HILQH+RPHGLVSOD\
"
Navigation
"+RPH" > "6HWWLQJV" > "*HQHUDOVHWWLQJV" > "'HILQH+RPHGLVSOD\"
"'HILQH+RPHGLVSOD\"
•"6HOHFW+RPHGLVSOD\W\SH"
•"'HILQH+RPHGLVSOD\FRQWHQWV".
In this menu, you can set the +RPH display to show up to four
user-set parameters or a graphical illustration of a performance
curve.
"
6HOHFW+RPHGLVSOD\W\SH
"
1. Select "/LVWRIGDWD" or "*UDSKLFDOLOOXVWUDWLRQ" with or .
2. Press [OK] to save.
To specify the contents, go to "'HILQH+RPHGLVSOD\FRQWHQWV".
"
'HILQH+RPHGLVSOD\FRQWHQWV
"
1. To set "/LVWRIGDWD", press [OK]. A list of parameters appears
in the display.
2. Select or deselect with [OK].
The selected parameters are shown below. The arrow indicates
that the parameter links to the "6HWWLQJV" menu and works as a
shortcut for quick settings.
1. To set "*UDSKLFDOLOOXVWUDWLRQ", press [OK].
2. Select the desired curve.
3. Press [OK] to save.
3.1.19.12.0.0 Alarm and warning settings
3.1.19.5.0.0 'HOHWHKLVWRU\
3.1.19.6.0.0 'HILQH+RPHGLVSOD\'HILQH+RPHGLVSOD\FRQWHQWV