Need help?Do you have a question about the Grundfos SP 77 and is the answer not in the manual?
General| Pump Type | Submersible |
|---|---|
| Max Flow Rate | Varies depending on the specific model (e.g., SP 77-1, SP 77-2), consult product datasheet |
| Max Head | Varies depending on the specific model (e.g., SP 77-1, SP 77-2), consult product datasheet |
| Impeller Material | Stainless steel |
| Housing Material | Stainless steel |
| Motor Power | 30 kW |
| Discharge Diameter | 100 mm |
| Power Consumption | 30 kW |
| Frequency | 50 Hz |
Explains hazard symbols and statements used in the manual for safety awareness.
Procedures for checking and refilling motor liquid for various Grundfos motor types.
Guidelines for pump installation orientation and positioning.
Details on protecting motors and setting protective circuit breakers.
Steps for connecting the submersible drop cable to the motor, including lubrication and torques.
Steps for safely starting the pump, including valve closure and rotation check.
Detailed causes and remedies for pump not running, no water, or reduced performance.
Causes and remedies for frequent pump starts and stops.
Procedures for checking supply voltage, current consumption, winding resistance, and insulation resistance.
To Next Page
