Need help?Do you have a question about the Grundfos SP 5A and is the answer not in the manual?
General| Type | Submersible pump |
|---|---|
| Model | SP 5A |
| Category | Water Pump |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Stainless steel |
| Weight | 10 kg |
| Maximum operating pressure | 10 bar |
| Liquid temperature range | 0 to 35 °C |
Key safety warnings and symbols used in the manual for safe operation.
Procedure for checking and refilling the factory-filled motor liquid for various motor types.
Maximum liquid temperatures and minimum flow velocities required for motor cooling.
Details on essential motor protection devices and requirements for single and three-phase motors.
Guidelines for setting motor-protective circuit breakers for optimal protection and trip class.
Information on installing overvoltage protection devices to protect against lightning-induced surges.
Methods and tools for selecting the correct submersible drop cable cross-section based on voltage drop.
Wiring instructions for 2-wire, PSC, and 3-wire single-phase motors to the mains supply.
Wiring diagrams and procedures for connecting three-phase motors for direct-on-line and star-delta starting.
Steps for connecting the submersible drop cable to the motor, including torque specifications.
Procedure for initial pump startup, including valve positioning and checks.
A comprehensive guide to identifying and resolving common pump faults and their causes.
To Next Page
