Need help?Do you have a question about the Grundfos SP Series and is the answer not in the manual?
General| Type | Submersible borehole pump |
|---|---|
| Material | Stainless steel |
| Protection Class | IP68 |
| Applications | irrigation, pressure boosting, Industrial applications |
| Motor Range | 0.37 kW to 22 kW |
| Liquid Temperature Range | 0°C to +40°C |
| Installation | Vertical |
| Maximum Sand Content | 50 g/m³ |
| Maximum Submersion Depth | Up to 200 meters |
| Voltage | 380-415 V |
| Frequency | 50 Hz / 60 Hz |
Critical safety warning regarding electrical hazards during installation.
Safety warnings about crushing injuries during handling and lifting.
Essential checks to perform before installing the pump.
Specifies allowed and disallowed pump orientations and installation positions.
Detailed steps for making a watertight motor cable splice.
Critical safety warning about electrical hazards.
Guidelines for using VFDs with Grundfos motors.
Critical safety instructions for grounding control boxes.
Procedure to check and correct current imbalance in three-phase systems.
Common electrical issues and their remedies.
Common causes and remedies when the pump fails to start.
Issues causing the pump to run without water delivery.
To Next Page
