Need help?Do you have a question about the Grundfos SP 160 and is the answer not in the manual?
General| Head | Varies by model, consult specific datasheet |
|---|---|
| Type | Submersible pump |
| Material | Stainless steel |
| Frequency | 50 Hz |
| Housing Material | Stainless steel |
| Impeller Material | Stainless steel |
Symbols and hazard statements in Grundfos installation and operating instructions.
Safety warnings and instructions for handling Grundfos pumps.
Procedure to check and refill motor liquid for Grundfos motors.
Filling procedure for MS4000 and MS402 submersible motors.
Checking and filling procedure for MS6000 submersible motors.
Filling procedure for MMS submersible motors.
Guidelines for vertical and horizontal pump installation.
Importance and methods of protecting submersible motors.
Motor protection requirements for single-phase motors.
Motor protection requirements for three-phase motors.
Procedure for selecting appropriate cable cross-section.
Procedure for initial pump startup.
Causes and remedies when the pump fails to start.
Causes and remedies for no water output from the pump.
Causes and remedies for reduced pump performance.
To Next Page
