Need help?Do you have a question about the Grundfos TP 40-160 and is the answer not in the manual?
General| Maximum Head | 16 m |
|---|---|
| Max Head | 16 m |
| Power supply | Varies depending on the specific model within the TP 40-160 range. |
| Type | Centrifugal pump |
| Flow rate | Up to 12 m³/h |
| Maximum Flow | 12 m³/h |
| Max Flow Rate | 12 m³/h |
| Head | Up to 16 m |
| Motor power | 0.37 kW to 1.1 kW |
| Power | 0.37 kW to 1.1 kW |
| Rated Power - P2 | 0.37 kW to 1.1 kW |
| Flange Standard | DIN |
| Rated Current | Varies depending on the specific model within the TP 40-160 range. |
| Frequency | 50 Hz |
Presents performance curves for 2-pole pumps (3400 RPM), showing head vs. flow rate.
Presents performance curves for 4-pole pumps (1690 RPM), showing head vs. flow rate.
Specifies maximum working pressure (145 psi) and fluid temperature (+284 °F).
Covers flow, head, temp, pressure, construction details, and materials for TP, TPE pumps.
Details shaft seal types (BUBE, RUUE, AUUE) and flange connections for TP, TPE pumps.
Highlights TPE pump control capabilities, VFD, and design benefits like top-pull-out.
Details applications, technical data, and construction for TPE Series 2000 pumps.
Provides pump selection guidelines and control options for TPE Series 2000 pumps.
Covers applications, technical data, and construction for TPE Series 1000 pumps.
Illustrates control modes and explains control options for TPE Series 1000 pumps.
Provides electrical data for 2-pole and 4-pole motors and notes on motor protection.
To Next Page