Need help?Do you have a question about the Grundfos TP 32-40 and is the answer not in the manual?
General| Brand | Grundfos |
|---|---|
| Model | TP 32-40 |
| Category | Water Pump |
| Language | English |
Compares Grundfos models with B&G, Taco, and Armstrong equivalents.
Introduces TP/TPE pumps, applications, and the three main product groups.
Details TPE Series 2000 pumps, their features, benefits, and applications.
Details TPE Series 1000 pumps, their features, benefits, and applications.
Lists the advantages of TPE pumps with electronic speed control for efficiency and comfort.
Explains the coding system used to identify TPE pump models and their specifications.
Provides codes and explanations for different shaft seal types and materials used.
Displays performance curves (Head vs. Flow) for 2-pole TPE pumps.
Displays performance curves (Head vs. Flow) for 4-pole TPE pumps.
Lists product numbers, horsepower, and motor types for TPE Series 2000.
Lists product numbers, horsepower, and motor types for TPE Series 1000.
Explains using affinity equations to select pumps for optimal operating economy.
Introduces WinCAPS and WebCAPS for pump selection and energy analysis.
Specifies the maximum allowable working pressure for TPE pumps.
Specifies the maximum fluid temperature for TPE pump operation.
Specifies maximum ambient temperature and relative humidity for operation.
Lists suitable liquids for TP, TPE pumps and general recommendations.
Detailed list of liquids, notes, and required shaft seals for compatibility.
Details pump materials, construction features, and technical data.
Describes the three types of unbalanced mechanical shaft seals available.
Details pump connections, flange types, and control capabilities.
Lists applications, technical data, and construction for TPE Series 2000 pumps.
Explains control modes, selection guidelines, and control options for TPE Series 2000.
Details the functions and operation modes for TPE Series 2000 pumps.
Lists technical data, construction, and applications for TPE Series 1000 pumps.
Details start/stop, digital inputs, and setpoint signal connections for TPE Series 1000.
Explains control modes, options, and applications for TPE Series 1000 pumps.
Details the functions and operation modes for TPE Series 1000 pumps.
Explains communication via BMS, remote control, and control panel.
Describes integration with central building management systems.
Details operation using the R100 remote control and local control panel.
Describes the totally enclosed, fan-cooled motor and its protection.
Provides detailed electrical data for 2-pole and 4-pole motors.
Explains the integrated VFD, PFC circuit, and other power electronics.
Discusses EMC compliance, RFI filter, and motor protection features.
Provides guidance on interpreting pump performance and efficiency curves.
Lists the conditions and guidelines applicable to the pump performance curves.
Displays performance curves for TP, TPE 32-XX/2 models.
Displays performance curves for TP, TPE 40-XX/2 models.
Displays performance curves for TP, TPE 50-XX/2 models.
Displays performance curves for TP, TPE 32-XX/4 models.
Displays performance curves for TP, TPE 40-XX/4 models.
Displays performance curves for TP, TPE 50-XX/4 models.
Displays performance curves for TP, TPE 80-XX/4 models.
Displays performance curves for TP, TPE 100-XX/4 models.
Guides on installing TP, TPE pumps in horizontal and vertical pipe orientations.
Recommends methods for reducing noise and vibration during pump operation.
Advises on using a condensation cover for TPE pumps installed outdoors.
Explains the use of vibration dampers and expansion joints for pump installation.
Shows standard and alternative positions for pump control panels.
Provides instructions for electrical connection and protection according to regulations.
Details protection requirements for fault currents, especially with ELCBs.
Specifies requirements for screened cables used for pump communication.
Explains wiring for external contacts, digital functions, and bus connections.
Lists available differential pressure sensor kits and their components.
Lists spare parts and their compatibility with different pump models.
Provides product numbers for flange gaskets and optional shaft seal kits.
Describes WebCAPS, a web-based computer-aided product selection tool.
Details catalog information and access to product literature via WebCAPS.
Describes the service catalog and videos available within WebCAPS.
Explains using WebCAPS for sizing, replacement, and downloading CAD drawings.
Introduces WinCAPS, a Windows-based product selection program for offline use.
A template for providing technical and project-specific pump data for submittal.
To Next Page
