Need help?Do you have a question about the Grundfos TP and is the answer not in the manual?
General| Motor Efficiency | IE3 |
|---|---|
| Series | TP |
| Connection Type | Flanged |
| Protection Class | IP55 |
| Installation | In-line |
| Material | Stainless Steel |
| Maximum Operating Pressure | 16 bar |
| Flange Standard | EN 1092 |
| Pump Housing Material | Stainless Steel |
| Impeller Material | Stainless Steel |
| Temperature Range | -25 °C to +120 °C |
| Liquid Temperature Range | -25 °C to +120 °C |
Symbols and hazard statements in Grundfos instructions.
Symbols and notes in Grundfos instructions.
Details about the TP and TPD pump types and their identification.
Types of liquids suitable for TP, TPD pumps.
How the pump is delivered from the factory.
Recommended siting for the pump.
Procedures for mechanical installation, including lifting and piping.
Measures to prevent damage from frost.
Guidelines for operating pumps with frequency converters.
Procedures for flushing and priming the pump before startup.
Recommendations for storing the pump.
Procedures for shaft adjustment and general servicing.
Guidelines for motor lubrication and bearing grease.
Troubleshooting guide for common pump issues.
Limits for ambient, liquid temperatures, and pressure.
Specifications for inlet pressure, flow rate, and sound levels.
Guidelines for environmentally sound product disposal.
To Next Page
