Need help?Do you have a question about the Grundfos TP 80-240 and is the answer not in the manual?
General| Type | Centrifugal pump |
|---|---|
| Maximum Operating Pressure | 16 bar |
| Pump Housing Material | Cast iron |
| Enclosure Class | IP55 |
| Insulation Class | F |
| Connection Size | DN 80 |
| Flange Standard | EN 1092-2 |
| Rated Frequency | 50 Hz |
| Frequency | 50 Hz |
| Material | Cast Iron |
Specifies maximum working pressure, fluid temperature, and relative humidity.
Lists suitable liquids, examples, temperature ranges, and shaft seal needs.
Detailed list of liquids, notes, and required shaft seals.
Describes BUBE, RUUE, AUUE seals and flange connection types.
Highlights electronic control, VFD, and corrosion resistance of pump housing.
Flow rate, head, temperature, pressure, motor sizes, and construction details.
Explains control modes, selection guidelines, and pump control options.
Lists available functions for setting, reading, and additional features via control panel, R100, GENIbus.
Flow rate, head, temperature, pressure, motor sizes, and construction details.
Describes control modes, applications, and pump control options.
Lists available functions for setting, reading, and additional features via control panel, R100, GENIbus.
Details integration with BMS, remote control (R100), and control panel operations.
Covers motor types, protection, and electrical specifications for TPE pumps.
Explains VFD components, PFC benefits, inrush, and inverter functions.
Strategies for reducing noise/vibration and preventing condensation.
Details on dampers, expansion joints, and control panel orientation.
Instructions for electrical connections, grounding, and communication cabling.
To Next Page