Need help?Do you have a question about the Grundfos SP 215 and is the answer not in the manual?
General| Model | SP 215 |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Type | Submersible Pump |
| Material | Stainless Steel |
| Housing Material | Stainless Steel |
Guidelines for safely handling pumps to prevent injury and damage.
Procedure for verifying and refilling motor liquid in submersible motors.
Details maximum liquid temperatures and minimum flow velocities for motor cooling.
Crucial safety warnings and procedures for electrical connections.
Requirements for protecting single-phase motors.
Requirements for protecting three-phase motors.
Guidance on setting motor-protective circuit breakers correctly.
Information and tools for selecting appropriate cable cross-sections.
Guidelines for operating motors with frequency converters.
Instructions for setting up the CUE frequency converter in SPE systems.
Steps for connecting the submersible drop cable to the motor.
Safety warnings and procedure for lowering the pump into the borehole.
Procedure and safety warnings for initial pump startup.
Specific service information and safety precautions for SPE pump sets.
Troubleshooting guide for common faults in SPE pump sets.
Detailed table of common faults, their causes, and recommended remedies.
Procedures for checking motor and cable integrity on SPE pump sets.
To Next Page
