EasyManua.ls Logo

Grundfos SMART Digital XL DDA 60-10 User Manual

Grundfos SMART Digital XL DDA 60-10
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SMART Digital XL - DDA
From 60 to 200 l/h
Installation and operating instructions
GRUNDFOS INSTRUCTIONS
Further languages
http://net.grundfos.com/qr/i/98767821

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Grundfos SMART Digital XL DDA 60-10 and is the answer not in the manual?

Grundfos SMART Digital XL DDA 60-10 Specifications

General IconGeneral
Max Flow Rate60 l/h
Max Pressure10 bar
Control TypeDigital
Protection ClassIP65
Power Supply50/60 Hz
Turn-down ratio1:3000
ApprovalsCE
Operating Temperature0°C to +45°C

Summary

General Information and Safety

1.1 Document Symbols and Warnings

Explains hazard symbols, qualifications, and operator safety instructions.

1.3 Safety Instructions and System Precautions

Details operator safety, chemical handling, and system safety in case of pump failure.

1.6 Diaphragm Leakage Procedures

Covers diaphragm leakage detection, hazards, and necessary actions.

Product Specifications and Data

2. Storage, Handling, and Transport

Guidelines for proper storage, unpacking, and transportation of the pump.

3. Product Introduction and Overview

Introduces pump applications, features, type key, and product overview.

4. Technical Data and Dimensions

Comprehensive technical specifications, including flow, pressure, CIP data, and dimensions.

Installation and Startup

5. Assembly and Installation

Steps for assembling the pump, mounting plate, and adjusting the control cube.

6. Startup Procedures

Details preparation, initial startup, language setting, deaeration, and calibration.

Operation and Service

7. Operation Modes and Controls

Explains control elements, display, navigation, operating states, and main menus.

8. Service and Maintenance

Covers regular maintenance, cleaning, service system prompts, and parts replacement.

9. Faults and Troubleshooting

Lists common faults, their possible causes, and recommended remedies for troubleshooting.