To Next PageTo Next Page
Need help?Do you have a question about the Grundfos SMART Digital S DDA and is the answer not in the manual?
General| Enclosure class | IP65 |
|---|---|
| Turndown ratio | 1:3000 |
| Frequency | 50/60 Hz |
| Protection Class | IP65 |
| Type | Diaphragm Dosing Pump |
| Power Supply | 1 x 100-240 VAC |
| Pressure, max | 10 bar |
| Approvals | CE, RoHS |
| Control Type | Digital Control |
| Voltage | 100-240 V |
| Material | Stainless Steel |
| Liquid temperature | 0°C to 50°C |
| Fluid Temperature Range | 0°C to 50°C |
| Operating Modes | Manual, Pulse, Analog, Batch |
| Operating Temperature | 0°C to 50°C |
Introduces the SMART Digital S DDA/DDC series and provides links to operational guides.
Details temperature ranges, sound level, and IP/Nema ratings for safe operation.
Covers electrical specifications and safety precautions for installation.
Displays a performance graph illustrating flow rate against pressure for different models.
Specifies required installation space and maximum weight load for the pump.
Step-by-step instructions for attaching the mounting bracket and connecting the pump.
Details the procedure for assembling and securely tightening the inlet tubing.
Provides diagrams for DDC-A and DDC connectors, showing pin assignments.
Guide to operating the pump via its digital interface, including settings and language.
Instructions for adjusting the pump's flow rate and performing calibration.
Explains the different visual indicators for operational warnings and alarms.
Covers maintenance procedures, component replacement, and final checks.
