Need help?Do you have a question about the Grundfos DME and is the answer not in the manual?
General| Brand | Grundfos |
|---|---|
| Model | DME |
| Category | Water Pump |
| Language | English |
Critical safety warnings and precautions for pump installation and handling chemicals.
Guidance on selecting an appropriate location and environmental conditions for the pump.
Step-by-step instructions for physically mounting and connecting the pump.
Explains the layout and functions of the pump's control panel, display, and buttons.
Procedures for starting, stopping, priming, and venting the pump.
Describes the meaning of indicator lights and how level sensors affect pump operation.
Information on integrating the pump with industrial fieldbus systems.
Guide to navigating the pump's menu structure for accessing settings.
Details on Manual, Pulse, Analog, Timer, and Batch operating modes.
Configuration and operation of the timer-based batch dosing function.
Setup for batch dosing and explanation of the anti-cavitation feature.
Covers capacity limitation settings and the use of non-resettable counters.
Instructions for resetting, returning to previous menus, and changing the display language.
Setting up level, stop, and analog signal inputs for various operational needs.
How to select between metric and US units for dosing quantities.
How the dosing monitor detects and reports incorrect dosing strokes.
Procedure for locking and unlocking the control panel to prevent unauthorized changes.
Recommended method for calibrating the pump by measuring actual output.
Using a table to add a calibration factor for less accurate calibration.
Method for verifying the pump's calibration accuracy over time.
To Next Page