Need help?Do you have a question about the Grundfos DMB 5.0-6 and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Maximum operating pressure | 10 bar |
| Pump housing | Stainless steel |
| Max Flow Rate | 5.0 m³/h |
| Max Head | 6 m |
| Power Consumption | 0.37 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Stainless Steel |
| Liquid Temperature | 0°C to +60°C |
| Phase | Single-phase |
Covers pressure, lift, sound, enclosure class, energy, ambient conditions, and media temperature limits.
Explains safety symbols, risks of non-compliance, and safe working practices.
Defines operator training needs and provides safety guidelines for users.
Outlines safety for maintenance, installation, and warns against unauthorized modifications.
Highlights risks of improper methods and ensures system safety during pump failure.
Guidance on selecting an appropriate installation site and mounting the pump.
Covers pre-start checks, assisting suction, starting without deaeration, and tightening dosing head screws.
Covers switching off the pump and the step-by-step process for diaphragm replacement.
To Next Page