Need help?Do you have a question about the Grundfos DME 375-10 and is the answer not in the manual?
Comprehensive safety instructions covering hazardous materials, unauthorized modifications, and system failure.
Step-by-step guide for mounting and installing the Dosing Skid System.
Instructions for safely connecting the electrical components of the DSS.
Procedures for initial system startup, including checks and venting.
Comprehensive safety instructions covering hazardous materials, unauthorized modifications, and system failure.
Step-by-step guide for mounting and installing the Dosing Skid System.
Instructions for safely connecting the electrical components of the DSS.
Procedures for initial system startup, including checks and venting.
General| Model | DME 375-10 |
|---|---|
| Category | Water Pump |
| Pressure | 10 bar |
| Power consumption | 170 W |
| Protection class | IP65 |
| Max Flow Rate | 375 l/h |
| Max Head | 10 bar |
| Frequency | 50/60 Hz |
| Phase | 1 |
| Supply voltage | 230 V |
| Materials, pump head | PVDF |
| Materials, valves | EPDM |
| Materials, seals | EPDM |
| Voltage | 230 V |
| Material | PVDF |
| Flow rate | 0-375 l/h |
To Next Page
