Need help?Do you have a question about the Grundfos DME 375 and is the answer not in the manual?
General| Pressure | Up to 10 bar |
|---|---|
| Protection class | IP65 |
| Max Flow Rate | 375 l/h |
| Frequency | 50/60 Hz |
| Liquid temperature | 0°C to 50°C |
| Max Liquid Temperature | +45°C |
| Housing Material | PP |
| Motor Power | 3.0 kW |
General safety guidelines for pump installation, operation, and maintenance.
Safety instructions for operators and users, including chemical handling.
Ensuring system safety during pump failures and recommending monitoring.
Safety warnings and precautions when handling dosing chemicals.
Procedures and warnings related to diaphragm leakage or breakage.
Warnings about operating the pump with loose dosing head screws.
Safety precautions to be observed before and during pump installation.
Guidance on physically mounting the pump and ensuring proper connections.
Instructions for safely connecting the pump to the electrical supply.
Overview of the pump's control panel components and their functions.
Methods for starting and stopping the pump, both locally and externally.
Explanation of the pump's status indicators and alarm relay functions.
Measures the dosed quantity of 100 strokes directly for calibration.
Verifies calibration by comparing consumption over a period.
Step-by-step procedure for performing direct calibration of the pump.
To Next Page
