Grundfos DME User Manual

19
4.17 Resetting
When "DEFAULT" is activated, the pump will return
to the factory settings.
NOTE: The calibration is also set back to the default
setting. This means that a new calibration is required
when the "DEFAULT" function has been used.
Fig. 18 Resetting
4.18 Return
Fig. 19 Return function
The "RETURN" function makes it possible to return
from any level in the menu to the operating display
without changes after the menu functions have been
used.
4.19 Language
The display text can be displayed in one of
the following languages:
• English
• German
•French
• Italian
• Spanish
• Portuguese
•Dutch
• Swedish
•Finnish
• Danish
•Czech
•Slovak
• Polish
• Russian.
Operating display Operating display
without changes
Grundfos.bk Page 19 Wednesday, May 21, 2008 11:21 AM

Grundfos DME Specifications

General

Brand	Grundfos
Model	DME
Category	Water Pump
Language	English