Need help?Do you have a question about the Grundfos SMART Digital DDA and is the answer not in the manual?
General| Protection Class | IP65 |
|---|---|
| Frequency | 50/60 Hz |
| Power Supply | 100-240 V, 50/60 Hz |
| Control Type/Modes | Manual, pulse, analog, timer |
| Material | Stainless Steel |
| Temperature Range | 0°C to +45°C |
Identifies safety instructions by symbols used throughout the manual.
Specifies required qualifications and training for personnel involved with the pump.
Provides essential safety guidelines for operators and users of the pump.
Outlines measures to ensure overall system safety during pump failure.
Lists the suitable applications and media for the DDA dosing pump.
Details prohibited operating methods and the consequences of incorrect use.
Outlines the conditions for a valid guarantee claim for the pump.
Explains the information found on the pump's nameplate for identification.
Presents detailed technical specifications, performance data, and operational limits of the pump.
Details the steps and requirements for physically assembling and mounting the pump.
Explains how to reposition the pump's control cube for optimal user access.
Step-by-step guide to setting the desired language for the pump's interface.
Instructions on how to remove air from the pump and dosing lines.
Explains the process and requirements for calibrating the pump's dosing accuracy.
Describes the pump's control panel, buttons, and display elements.
Explains the pump's display, symbols, and operating state indicators.
Explains the manual operation mode for constant dosing.
Describes the pulse operation mode for dosing based on external pulses.
Describes the timer mode for dosing at regular cycle intervals.
Explains the weekly timer mode for defining multiple dosing schedules.
Lists the settable pressure ranges for monitoring and alarm functions.
Provides instructions for calibrating the pressure sensor.
Explains how to select between metric and US units for display.
Details how to configure additional information displayed on the pump screen.
Describes how to configure the pump's relay outputs for external control signals.
Explains the service requirement indicators and their meaning.
Provides guidelines on using genuine spare parts and where to find maintenance information.
Illustrates the components of the dosing head for service purposes.
Step-by-step guide for safely dismantling the diaphragm and valves.
Instructions for correctly reassembling the diaphragm and valves after service.
Introduces the section listing and explaining pump faults and their remedies.
A declaration form to be filled when returning the pump for service.
To Next Page