Need help?Do you have a question about the Grundfos DDA 12-17-7 and is the answer not in the manual?
General| Model | DDA 12-17-7 |
|---|---|
| Category | Water Pump |
| Power consumption | 0.37 kW |
| Protection class | IP65 |
| Max Flow Rate | 12 l/h |
| Max Head | 17 bar |
| Phase | 1 |
| Power supply | 230 V |
| Voltage | 100-240 V |
| Frequency | 50 Hz |
| Pressure | 17 bar |
| Seal Type | Mechanical seal |
Provides essential safety warnings and instructions for handling dosing chemicals.
Details hazards and precautions related to diaphragm breakage in the pump.
Detailed technical specifications including performance, electrical, and mechanical data.
Guides on correctly connecting the suction, discharge, and deaeration hoses.
Details the wiring diagram for connecting the pump's electrical components and signals.
Describes various modes like Manual, Pulse, Analog, Batch, and Timer for controlling the pump.
Describes the FlowControl function for monitoring and detecting dosing errors.
Covers pressure monitoring features and the procedure for calibrating the pressure sensor.
Explains flow measurement capabilities and the AutoFlowAdapt function for maintaining target flow.
Provides detailed steps for performing maintenance, including dismantling and reassembling components.
Details the steps for handling and repairing a broken or leaking diaphragm.
Comprehensive list of potential faults, their causes, and recommended remedies.
To Next Page