Need help?Do you have a question about the Grundfos SMART Digital S DDA 7.5-16 and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Max Flow Rate | 7.5 l/h |
| Max Pressure | 16 bar |
| Control Type | Digital |
| Protection Class | IP65 |
| Materials, valve ball | Ceramic |
| Materials, sealing | EPDM |
| Power Supply | 100-240 V, 50/60 Hz |
| Operating temperature | 0 ... 45 °C |
| Approvals | CE, RoHS |
| Suction lift | 1.5 m |
| Model | DDA 7.5-16 |
Explains hazard symbols like DANGER, WARNING, CAUTION and their structure for safe operation.
Describes safety symbols found on the product itself and their meanings for user awareness.
Identifies authorized and trained experts as the intended users of these instructions.
Provides critical safety warnings for users handling chemicals and operating the system.
Warns against modifications and stresses the use of original parts to prevent malfunction.
Ensures system safety during product failure, emphasizing monitoring and control functions.
Details safety precautions for handling chemicals, including PPE and SDS.
Refers to specific pump and control panel instructions for model-dependent certificates.
Defines the system's intended application and media compatibility for safe operation.
Lists media and conditions for which DSS systems are not intended, warning against misuse.
Explains the purpose of the type key for identifying DSS systems, not for configuration.
Details the codes for the number of pumps per skid in the DSS type key.
Explains pump model (DDA, DDE) and control variant codes (B, PR, AR, FCM) in the type key.
Lists pump head and gasket material codes (PP, EPDM, Viton) used in the DSS type key.
Guides on mounting the DSS system on a wall or floor, ensuring a solid and even surface.
Instructions for connecting inlet, outlet, drain/vent pipes, and checking O-rings and connections.
Emphasizes that electrical connections must be done by a qualified electrician according to regulations.
Steps for startup: retightening joints, checking wiring, flushing, opening valves, and venting.
States that calibration must be performed with the dosing medium, referring to pump instructions.
Outlines daily, weekly/monthly, and annual checks for system integrity and component function.
Provides a table detailing the dimensions (height, width, depth) for various DSS pump models and configurations.
Lists component sizes for piping, calibration columns, and pulsation dampeners across different DSS pump models.
To Next Page