Grundfos SMART Digital DDA - Pump Commissioning; Setting Menu Language

English (GB)
16
5. Commissioning
5.1 Setting the menu language
For description of control elements, see Section 6.
1. Turn click wheel to highlight the cog symbol.
2. Press the click wheel to open the ’Setup’ menu.
3. Turn the click wheel to highlight the ’Language’
menu.
4. Press the click wheel to open the ’Language’
menu.
5. Turn the click wheel to highlight the desired
language.
6. Press the click wheel to select the highlighted
language.
7. Press the click wheel again to confirm the
’Confirm settings’ prompt and apply the setting.
Fig. 12 Set menu language
TM04 1184 1110
Operation
English >
Manual >
Actual flow
Off
❑
Language
Operation mode
Analog output
SlowMode
FlowControl active
Operation
Setup
Setup
Setup
Setup
Setup
l/h
Manual
7.50
l/h
Manual
English >
Manual >
Actual flow
Off
❑
Language
Operation mode
Analog output
SlowMode
FlowControl active
❑
❑
❑
❑
English
Deutsch
Francais
Espanol
Italiano
❑
❑
❑
❑
English
Deutsch
Francais
Espanol
Italiano
Confirm
settings?
7.50