Declaration of conformity
6
– Machinery Directive (2006/42/EC).
Standard used: EN 809:1998 + A1:2009
– ATEX Directive (2014/34/EU) (applies only to products with ATEX
mark on the nameplate).
Standards used: EN80079-36:2016, EN80079-37:2016
This EC/EU declaration of conformity is only valid when published as
part of the Grundfos installation and operating instructions
(96551018).
Additional directives and standards effective from 22 July 2019:
– RoHS Directives: 2011/65/EU and 2015/863/EU
Standard used: EN 50581:2012
Bjerringbro, 17 December 2018
Erik Andersen
Senior Manager
GRUNDFOS Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile the technical file and
empowered to sign the EC/EU declaration of conformity
To Next Page
Loading...
Need help?
General
