OPERATION ______________________________
3 Your body weight will be ashing on the LCD
display
B
.
– Wait until the indication of your weight
stops ashing.
4 After about 10 seconds the scale switches o
automatically.
Notes
■ The appliance has a self calibration facil-
ity. After every energizing, it performs self
calibration which may cause to measure your
weight inaccurately at your rst 2 measure-
ments.
■ If the batteries are low on charge, ”LO”
appears on the LCD display
B
. Replace the
batteries with the new ones.
■ The maximum load of the scale is180 kg. If
this is exceeded, “Err” appears on the LCD
display
B
. Step down from the glass surface
immediately.
■ If the LCD display shows a malfunction, reset
the scale. Remove the batteries, wait for 10
seconds and then insert them again.
■ The scale is equipped with an automatic o
function to preserve the battery. It switches
o automatically after 10 seconds once the
measurement is complete.
To Next Page
Loading...
Need help?
General
