33
ENGLISH
BLUETOOTH OPERATION
-----------------------------------------------------------------------------
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device
to this player, you need to pair your device to
this player.
Note:
▪
The operational range between this player
and a Bluetooth device is approximately 8 me-
ters (without any object between the Bluetooth
device and the unit).
▪
Before you connect a Bluetooth device to this
unit, ensure you know the device’s capabilities.
▪
Compatibility with all Bluetooth devices is not
guaranteed.
▪
Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
▪
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the
(SOURCE) but-
ton repeatedly on the unit or the BT button on
the remote control to select Bluetooth mode.
"BT DISCONNECT" will show on the dis-
play if the unit is not paired to any Bluetooth
device.
2 Activate your Bluetooth device and select the
search mode. "Grundig DSB 2000" or
"Grundig GSB 950" will appear on your
Bluetooth device list.
▪
If you can't find the unit, press and hold the
or BT button on the remote control to be
searchable. You will hear audio prompt from
the unit and the display will show “PAIR-
ING” .
3 Select "Grundig DSB 2000" or "Grundig
GSB 950" in the pairing list. After audio
prompt, the system is successfully connect-
ed and and the display panel shows "BT
CONNECTED" .
4 Play music from the connected Bluetooth de-
vice.
To disconnect the Bluetooth function,
you can :
▪
Switch to another function on the unit.
▪
Disable the function from your Bluetooth
device. The Bluetooth device will be discon-
nected from the soundbar after audio prompt.
▪
Press and hold the or BT button on the re-
mote control.
Tips:
▪
Enter "0000" for the password if necessary.
▪
If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
▪
The player will also be disconnected when
your device is moved beyond the operational
range.
▪
If you want to reconnect your device to this
player, place it within the operational range.
▪
If the device is moved beyond the operational
range, when it is brought back, please check
if the device is still connected to the player.
▪
If the connection is lost, follow the instructions
above to pair your device to the player again.
Listen to Music from Bluetooth Device
▪
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the player.
▪
If the device also supports Audio Video
Remote Control Profile (AVRCP), you can
use the player's remote control to play music
stored on the device.
1 Pair your device with the player.
2 Play music via your device (if it supports
A2DP).
3 Use supplied remote control to control play (if
it supports AVRCP).
▪
To pause/resume play, press the button on
the remote control.
▪
To skip to a track, press the / buttons
on the remote control.
To Next Page
Loading...
Need help?
General
