ENGLISH
46
Updating software
(for digital channels only)
1 In the »SETTINGS« menu, select the line
»Check For Updates updates« with »
V
« or
»
Λ
« and press
»OK«
to confirm.
– A search for new software will be made
and – if available – it will be installed.
Note:
7
If a search for software updates should be
made automatically, select the line »Auto-
matic OAD« with »
V
« or »
Λ
« and use »
<
«
or »
>
« to select the option »On«.
– The software will be updated automati-
cally as far as possible.
2 Press »EXIT« to end the setting.
Restoring the television to the
default settings
This function allows you to delete the channel
lists and all custom settings.
1 In the »SETTINGS« menu, select the line
»Restore Factory Defaults« with »
V
« or »
Λ
«
and press
»OK«
to confirm.
2 Press »
« (green) to confirm the warning
message.
– The »Source Setup« menu appears.
3 Continue the settings with the chapter “Initial
set-up and tuning television channels” on
page 14.
CONVENIENCE FUNCTIONS
------------------------------------------------------------------------
To Next Page
Loading...
Need help?
General