Grundig 48 VLE 5421 BG User Manual

ENGLISH
8
CONNECTION AND PREPARATION
-----------------------------------------------
Connecting the antenna and the power adapter
1 To receive digital satellite channels (DVB-S/
S2), connect the satellite antenna cable to
the antenna socket »SATELLITE« on the tel-
evision set.
And/or:
2a
To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the an-
tenna socket »ANT IN« on the television set;
or
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket »ANT IN« on the
television set;
or
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the an-
tenna socket »ANT IN« on the television set
Note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
3 Plug the power cord of the power adapter
into a wall socket.
Notes:
7
Before pluging in the electrical cable make
sure that the adapter is connected to the tel-
evision.
7
Do not plug in the power adapter until you
have connected the external equipment and
the antenna.
7
Do not use an adapter plug or extension
lead which does not meet the applicable
safety standards. Do not tamper with the
power cord.
4
1
2
3

Grundig 48 VLE 5421 BG Specifications

General

Smart modes	Hotel
Screen shape	Flat
Response time	- ms
Display diagonal	48 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Native refresh rate	200 Hz
LED backlighting type	Edge-LED
Display diagonal (metric)	121 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	PPR (Picture Perfection Rate)
3D	No
Annual energy consumption	127 kWh
Tuner type	Analog & digital
Analog signal format system	-
Digital signal format system	DVB-C, DVB-S, DVB-T
Audio system	SRS TruSurround
RMS rated power	40 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supported	AAC, M4A, WMA
Image formats supported	BMP, JPG, PNG
Video formats supported	AVI, DAT, DIVX, MKV, MOV, MP4, MPG, TRP, TS, VOB
Product color	Black
Panel mounting interface	400 x 200 mm
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	87 W
Power consumption (standby)	0.5 W
Package depth	145 mm
Package width	1160 mm
Package height	790 mm
Package weight	12250 g

Weight and Dimensions

Depth (with stand)	220 mm
Height (with stand)	683 mm
Depth (without stand)	45 mm
Width (without stand)	1086 mm
Height (without stand)	652 mm
Weight (without stand)	9250 g