What to do if my Grundig TV remote control does not work?
If your Grundig TV remote control isn't working, ensure that you are pointing it directly at the television set. Check the remote's batteries and replace them if needed. As a last resort, switch off the television with the main power button for approximately 2 minutes.
What to do if Grundig 49 VLE 6625 BP TV DMS device cannot be found?
If your Grundig TV can't find the DMS device, first make sure that the DMS device is on and operating. If it is, check the network settings.
Why is my Grundig 49 VLE 6625 BP screen lit with snow, but there's no station?
If your Grundig TV screen is showing snow but no station, it could be due to several reasons. First, ensure the antenna cable is properly connected. It's also possible that no TV stations have been programmed, so try starting a station search. Check if the picture settings are incorrectly set and adjust the brightness, contrast, or colour. The problem might also be at the station itself, so test with a different station. Finally, interference from other devices could be the cause; try changing the position of the device.
Why does my Grundig TV have ghosting, reflection, no color picture, but no sound?
If your Grundig TV is showing ghosting, reflection, no colour picture, but no sound, there could be several reasons. Check the channel setting by performing automatic or manual channel setting/fine tuning. Have the antenna cable or system checked. Ensure the colour intensity isn't at minimum; turn it up. If available, select the correct colour standard in the TV standard setting. Test with another channel in case there's a problem at the station. Also, ensure the volume isn't set to minimum; turn it up or switch it on.
What to do if my Grundig 49 VLE 6625 BP TV teletext is missing or faulty?
If the teletext feature on your Grundig TV is missing or faulty, the issue might be with the station, so test with another channel. It's also possible that the television station has no teletext, or there's an issue with the antenna system; test another channel for fine tuning and ghosts. A weak station signal could also be the cause; check the antenna system.
Why is the picture dark in PC mode on my Grundig TV?
If the picture is dark in PC mode on your Grundig TV, the cause might be an incorrect setting for picture resolution and picture frequency on the PC. Try changing the setting on the PC (for example, picture resolution 1280 x 768, picture frequency 60Hz).
General| Screen Size | 49 inches |
|---|---|
| Display Type | LED |
| Smart TV | Yes |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Ethernet Port | Yes |
| Audio Output | 20W |
| Energy Efficiency Class | A+ |
| HDR | No |
| Bluetooth | No |
| Weight | 11.5 kg |
| Resolution | 1920 x 1080 (Full HD) |
To Next Page