ENGLISH
40
5 Use »
V
« or »
Λ
« to select »Symbol Rate
(Ksym/s)« and confirm with »
«.
6 Enter the channel location list frequency
symbol rate with »1...0«, select the »
« on
the virtual keyboard and confirm with »
«.
7 Use »
V
« or »
Λ
« to select »Polarization«
and confirm with »
«button.
8 Use »
V
« or »
Λ
« to select »Polarization«
and confirm with »
«button.
9 Use »
V
« or »
Λ
« to select »Programme ID«
and confirm with »
«.
10 Enter the channel location list frequency pro-
gramme ID with »1...0«, select the »
« on
the virtual keyboard and confirm with »
«.
11 Use »
V
« or »
Λ
« to select »Save Location«
and confirm with »
«.
Note:
7
TKGS Locator List can be entered for more
than one frequency. Repeat steps 2 to 11 to
add to different frequencies.
12 Press »
a
« to return to the previous menu
orpress »
H
TV« to return to the broadcast.
Resetting table version
1 Select »Reset Table Version« from the »TKGS
Setting« menu with »
V
« or »
Λ
« and con-
firm with »
«.
– A warning message shall be displayed.
2 Select »OK« to confirm the reset;
or
»Cancel« to cancel and press »
« to con-
firm.
3 Press »
a
« to return to the previous menu
orpress »
H
TV« to return to the broadcast.
Preferred List
1 Select »Preferred List« from the »TKGS Set-
ting« menu with »
V
« or »
Λ
« and confirm
with »
«.
2 Press »
V
« or »
Λ
« to select »HD« or »SD«
and confirm with »
«.
3 Press »
a
« to return to the previous menu
orpress »
H
TV« to return to the broadcast.
FUNCTIONING OF THE TV - ADVANCED FUNC-
TIONS
----------------------------------------------------------------------------------------------------------------------------
Signal information
1 Select »System information« from the »Ad-
vanced Options« menu with »
V
« or »
Λ
«
and confirm with »
«.
– »System information« shall be displayed.
Notes:
7
Signal information changes depending on
the current source.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
2 Press »
a
« to return to the previous menu
orpress »
H
TV« to return to the broadcast.
Open Source Licenses
1 Select »Open Source Licenses« from the
»Advanced Options« menu with »
V
« or
»
Λ
« and confirm with »
«.
– »Open source license shall be displayed.
2 View licenses with »
V
« or »
Λ
«.
3 Press »
a
« to return to the previous menu
orpress »
H
TV« to return to the broadcast.
To Next Page
Loading...
Need help?
General