Grundig AS-3D - Operation

15
ENGLISH
OPERATION
----------------------------------------------------------------------------------
General information for
operation
7
Follow these informations, other-
wise, you may not be able to
enjoy 3D effects.
7
When watching 3D images under
a fluorescent lamp (50Hz/60Hz)
or 3 wavelength lamp, you may
notice a small amount of screen
flickering. If so, dim the light or
turn the lamp off.
7
If you change the channel or input
mode when watching 3D, 3D
glasses are turned off, and the
screen could be displayed abnor-
mally. After a while, 3D glasses
are automatically turned off.
7
If the TV emitter becomes discon-
nected due to either a change in
the viewing angle or distance, the
3D glasses turn off automatically
after 10 seconds. If this occurs, the
red LED blinks three times.
7
3D glasses may not work prop-
erly due to noise interference from
other electric devices such as a
PDP or LCD TV or direct Sunlight
under specific conditions.
7
Be sure to stay within the viewing
angle and optimum TV viewing dis-
tance when watching 3D pictures.
Turning on the 3D glasses
1 Press the power button.
– The green LED glows for 2 sec-
onds.
Turning off the 3D glasses
1 Press and hold down the power
button for 2 seconds.
– The red LED is blinking one
time.
Note:
7
Turn off 3D glasses while not us-
ing. If you leave 3D glasses on,
battery lifespan is shortened.