Grundig GDT 310 - Phone Settings: Base and Registration Management; Handset Registration Management

ENGLISH
25
De-register a Handset
You are requested to enter the 4-digit
PIN in order to de-register a handset
from the base station. The antenna icon
on the de-registered handset will blink.
Note:
█
You cannot de-register the hand-
set that you are currently using.
1 Press » « and » « to select BS
SETTINGS.
2 Press » « and » « to select
DELETE HS.
3 Press » « and you are requested
to enter the 4-digit system PIN.
4 Enter the 4-digit system PIN.
5 Press » « and a list of registered
handsets is displayed.
6 Press » « to select one of the
handsets that you want to de-regis-
ter.
7 Press » « to confirm.
Change the dial mode (Op-
tional)
1 Press » « and » « to select BS
SETTINGS.
2 Press » « and » « to select
DIAL MODE.
3 Press » « and » « to select
TONE or PULSE.
4 Press » « to confirm.
Base Settings
The current settings are marked an as-
terisk which is displayed at the right-
most of the menu item.
Set the Base Ringer Melody
(Optional)
1 Press » « and » « to select BS
SETTINGS.
2 Press » « and » « to select BS
RINGER.
3 Press » « and » « to select
the desired ringer melody (a total of
5 melodies for your selection)
Note:
█
The respective ringer melody will
be played while browsing the
melody list.
4 Press » « to confirm.
Set the Ringer Volume (Optional)
1 Press » « and » « to select BS
SETTINGS.
2 Press » « and » « to select
RING VOLUME.
3 Press » « and » « to select
the desired ringer volume (a total
of 6 ringer volume levels including
VOLUME OFF).
Note:
█
The respective ringer volume will
be played during your selection.
4 Press » « to confirm.
PHONE SETTINGS
________________________________________