Grundig GDT 310 - Phone Settings: Flash Time and PIN; Flash Time and System PIN Code

ENGLISH
26
Note:
█
If the new PIN entered in Step 6 is
not matched with the new system
PIN entered in Step 5, user is re-
quested to enter the valid system
PIN again in Step 5.
7 Press » « to confirm.
Change the Flash Time
(Optional)
The flash time settings is country depen-
dent. Please contact your local service
provider for the correct settings.
1 Press » « and » « to select BS
SETTINGS.
2 Press » « and » « to select
FLASH TIME.
3 Press » « and » « to select
your desired flash time (SHORT, ME-
DIUM, LONG).
4 Press » « to confirm.
Change the System PIN Code
A 4-digit system PIN code is used for
changing the system settings of the
base station. It is used to protect your
phone against unauthorized use. The
default system PIN code is 0000.
1 Press » « and » « to select BS
SETTINGS.
2 Press » « and » « to select
CHANGE PIN.
3 Press » « and you are requested
to enter the 4-digit system PIN.
4 Enter the old system PIN.
5 Press » « and enter the new sys-
tem PIN.
6 Press » « and enter the new sys-
tem PIN again.
PHONE SETTINGS
________________________________________