The Remote Control Handset
ķ
9
The remote control buttons
1…9 (0/AV)Select programme pos. (also AV);
switch on from standby.
Ǽ
Switch to standby or on again.
v
Brightness.
TXT Teletext on/off.
i
Colour contrast.
i
Program position number fade
in/fade out.
Display Teletext overview.
ʀ Sound on/off (muting).
P+, P–
Select programme positions;
move cursor.
OK
Change and activate certain func-
tions.
– ņ,+ ŀ Volume;
move cursor.
AUX Call up programme data;
hold down for 4 sec. to call up the
ATS tuning system.
" » S « Only » BG « is possible.
" »DEC«If an encoded programme is assigned to this programme posi-
tion and an appropriate descrambler (decoder) is connected,
then select »ON«.
" »FT« If fine tuning is necessary after programme assignment, press
the ľ – button until the figures below FT get green.
Press the P+ or P– button until the best picture quality is
obtained.
Press the OK button to store the modified settings.
When storing is completed, the programme data of the next programme
position is displayed.
Press the i button to return to the TV programme.
4
3
r
Further functions
Change b/w contrast: press i, OK, – ņ, or + ŀ.
Programme Sleep Timer
(switch-off time 01…99 min.) :
press
i, OK, i and numeric buttons 1…9. Press the i button to return to the TV
programme.
Automatic frequency fine tuning on/off:
press
i, OK, i, i, then select with – ņ.
Ń
!
Every changed value (volume, etc.) is stored after approx. 8 sec.
Ń
!
Pressing the OK button twice recovers the factory pre-settings.
3
2
1
To Next Page
Loading...
Need help?
General