ENGLISH
20
Tuning and storing radio stations
(DAB and FM) – first installation
When the device is connected to the mains for
the first time or after factory reset, the Auto Tun-
ing System will start to scan the whole DAB band-
width and store in the program list.
The device will then scan the FM waveband and
store the first 10 radio stations as presets 1 to 10.
The time is updated automatically.
1 Press »ON/OFF« to switch on the device.
– Display: »WELCOME« and then »SCAN«.
– The automatic station search starts, searches
and stores the radio stations.
– After the automatic scan, the device switches
to standby, the current time lights up.
Tuning and storing DAB radio
stations – after a removal
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new DAB radio stations.
1 Press »ON/OFF« to switch on the device.
– Display: the name of the radio station, e.g.
»B5 AKT«.
2 Start the automatic station search by pressing
and holding down »MODE SCAN ALARM«.
– Display: »SCAN«.
– The automatic station search starts, searches
and stores the radio stations in the program
list.
Note:
7
You can also activate the automatic scan for
DAB and FM radio stations from the menu.
Open the menu with »MENU«.
Select the option »SYSTEM« with »+ VOL. -«
and confirm by pressing »SELECT/INFO«.
Select the option »ATS« with »+ VOL. -« and
press »SELECT/INFO« to confirm (display:
»N«).
Select »Y« with »+ VOL. -« and start the
automatic station search by pressing
»SELECT/INFO«.
SETTINGS
Storing DAB radio stations to
presets
After the automatic station search, all radio sta-
tions will be stored in the program list. You can
store your favored radio stations on presets 1 to
10.
1 Open the menu with »MENU«.
2 Select the option »STATION« with »+ VOL. -«
and press »SELECT/INFO« to confirm.
3 Select DAB radio stations with »+ VOL. -« and
press »SELECT/INFO« to confirm
4 For storing the DAB radio station on a preset,
press and hold down the required preset but-
ton »1« to »5«, until »STORED« appears.
Note:
7
Press »+5« for a short time and then the re-
quired preset buttons »1« to »5« change for
presets 6 to 10.
Programming DAB radio stations
– manually
1 Open the menu with »MENU«.
2 Select the option »MANUAL« with »+ VOL. -«
and press »SELECT/INFO« to confirm.
– Display: e.g. »I74.9 SA« (frequency and
channel of a DAB radio station).
3 Select the desired frequency/channel with
»+ VOL.« or »VOL. -«.
4 Press »SELECT/INFO« to confirm the frequen-
cy/channel.
– Display: the signal strength, the DAB radio
stations will be stored in the program list.
5 Press »MENU« to end the setting.
To Next Page
Loading...
