On this occasion, I also dismantled the winding discs and equipped them with new lubricants. In addition, the device
chassis was cleaned as well as possible.
The sliding couplings of the winding discs represent rather unique constructions. When disassembling one should pay
close attention to how the parts were assembled beforehand. Fortunately, I've done before disassembling pictures, as
it can be seen.
Of course, I also cleaned the housing thoroughly before the assembly took place. In any case, the repair of the device
was worth it. Now the TK 147 workes perfectly, and also the playback is clear and clear. The automatic recording level
reacts somewhat slowly, but is quite useful. After all, it is possible to make good recordings.
To Next Page
Loading...