Do you have a question about the Grundig TK46 and is the answer not in the manual?
Type | Reel-to-Reel Tape Deck |
---|---|
Weight | 12 kg |
Track System | 4-track, 2-channel stereo |
Wow and Flutter | 0.15% |
Reel Size | 7-inch |
Heads | 3 (Erase, Record, Play) |
Power Supply | 220 V, 50 Hz |
Inputs | Microphone |
Outputs | Line |
Instructions for turning the device on and off using the speed selector switch.
Guidance on correctly loading the tape onto the spools and threading it.
Explanation of the tape counter and its relation to recording time.
How to use the temporary stop bar for brief interruptions during operation.
Describes the automatic stop mechanism activated by metal foils on tape ends.
Instructions for fast winding and rewinding tape using the fast wind bar.
How to play back mono recordings via radio or built-in speakers.
Instructions for playing back stereo recordings via external amplifiers.
Methods for monitoring audio levels during recording.
How to monitor signals directly from the tape during recording.
Guidance for recording with a single microphone in mono mode.
Instructions for recording with two microphones or a stereo microphone.
Procedure for erasing tape content without performing a new recording.
Steps for recording telephone conversations using an adapter.
Instructions for recording audio from records or other tape recorders.
Using the TK 46 as an amplifier for audio playback.
How to transfer recordings from one tape to another.
Demonstration of playback recording, synchronizing multiple audio sources.
Guide to making multiple synchronous recordings onto separate tracks.
How to create echo effects by blending monitored signals into recordings.
Guidelines for exchanging tapes between different recorder types.
Advice on proper storage and cleaning of magnetic tapes.
Instructions on how to cut and join tape segments for editing.
Information on routine maintenance and when to seek professional service.
How to set the device for different mains voltage inputs.
Information on fuse ratings and replacement procedures.
Guidance for operating the device with DC or different AC frequencies.