How to improve poor radio reception on my Grundig UMS 4950 iP Stereo System?
If you are experiencing poor radio reception on your Grundig Stereo System, begin by checking the antenna. If you're receiving a weak FM stereo signal, switch to mono. Also, keep the hi-fi system away from electrical devices such as televisions, video recorders, computers, neon lamps, thermostats, or motors, as they may cause interference.
Why is there no sound coming from my Grundig UMS 4950 iP Stereo System?
If your Grundig Stereo System has no sound, first, ensure the volume isn't too low by increasing it. Then, check if headphones are plugged in and disconnect them. Verify the power cable is properly connected. Finally, make sure the mute function is deactivated.
What to do if the remote control of my Grundig UMS 4950 iP Stereo System does not work?
If the remote control of your Grundig Stereo System isn't working, the first thing to check is the battery. Replace it if it's flat. If that doesn't solve the issue, try moving closer to the hi-fi system, as the remote might be out of range.
What to do if Grundig UMS 4950 iP Stereo System does not react when buttons are pressed?
If your Grundig hi-fi system isn't responding to button presses, it might be due to static electrical discharge. To resolve this, switch off the hi-fi system, disconnect the power cable, and plug it back in after a few seconds.
Why does my Grundig UMS 4950 iP Stereo System skip tracks on a CD?
If your Grundig Stereo System is skipping tracks on a CD, the CD might be damaged or dirty; try replacing or cleaning it. Alternatively, the PROGRAM (playlist) or RANDOM functions might be active, so try deactivating them.
What to do if my Grundig UMS 4950 iP Stereo System doesn’t play CD-Rs or CD-RWs correctly?
If your Grundig Stereo System isn't playing CD-Rs or CD-RWs, or is playing them back incorrectly, the issue might stem from faulty software or hardware settings during the burning process, or the CD itself. Check the components of your CD burner/software or try using a different CD.
Why recording cannot be made on my Grundig UMS 4950 iP?
If you cannot make a recording on your Grundig Stereo System, the USB or memory card might not be compatible. Try using a different device or card.
General| Brand | Grundig |
|---|---|
| Model | UMS 4950 iP |
| Category | Stereo System |
| Type | Micro Hi-Fi System |
| CD Player | Yes |
| USB Port | Yes |
| iPod Compatibility | Yes |
| AM Tuner | No |
| Playable Formats | MP3 |
| Tuner | FM |
| Connectivity | AUX-in |
| Other Features | Remote Control |
Important safety precautions and instructions for setting up and using the hi-fi system.
Explains the purpose and operation of each button on the remote control unit.
Instructions for connecting the antenna for radio reception and the loudspeakers for audio output.
Steps for connecting external audio sources like CD players or other devices via AUX input.
Guide for inserting memory cards (SD/SDHC/MMC) and connecting an iPod or iPhone.
Instructions for connecting headphones and the main power supply to the hi-fi system.
Explains how to use the Jog-Shuttle for navigating menus and adjusting settings.
How to switch the system on/off and select the desired audio input source.
Instructions for inserting CDs and starting basic playback operations.
Guide for playing music files from USB memory sticks or MP3 players.
Instructions for playing audio files from various types of memory cards.
Steps to connect and listen to audio from external devices via the AUX input.
Configuring the timer to automatically switch the system on at a set time.
Solutions for common problems such as no sound, remote control issues, or poor reception.
To Next Page