Grundig V 210 - Front Panel Controls

1. Your Unit at a Glance
POWER Io button
This button is used for switching on the main unit as well as
other auxiliary units connected to the power supply sockets.
The yellow LED in the middle of the button indicates that the
unit is switched on.
DSR/AUX selection switch
This switch is used to select either the DSR (Digital Satellite
Radio) or AUX (auxiliary) input.
CD selection switch
This switch is used for selecting the CD (Compact Disc)
input.
PHONO selection switch
This switch is used for selecting the PHONO input.
VOLUME control
This is used for adjusting the volume.
TUNER selection switch
This switch is used to select the tuner (radio).
TAPE selection switch
You use this switch to select TAPE (tape recorder).
DCC selection switch
This switch is used for selecting DCC (Digital Compact
Cassette).
TREBLE contro!
This is for adjusting the upper frequency range of the sound
from the speakers.
BASS control
This is for adjusting the lower frequency range of the sound
from the speakers.
BALANCE control
This is used to adjust the sound balance between the left and
right channels.
DEFEAT switch
This switch is used to bypass the BASS and TREBLE controls
LOUDNESS switch
This switch is used during playback to adapt the volume level
to individual hearing sensitivity.
HEADPHONES socket
This socket is for connecting standard stereo headphones
with a 6.3 mm jack.
DOT switch
This is used for switching the DIRECT OPERATION TECHNIQUE
function on and off (refer also to 5.Important information).
DISPLAYS ON/OFF switch
This switch can be used to switch the displays of the auxiliary
units connected via the data bus on and off (refer also to
5. Important Information).