nearby during this process. You
might want to remove your
wristwatch, rings or other jew-
ellery before handling the pre-
amplifier. Please keep the car-
ton and all packing materials in
a dry place for safe future trans-
portation.
The following items are
enclosed:
1 Pandora preamplifier
1 Pandora power supply
1 AC power cables
2 DC power supply cables
1 pair of white gloves
1 acrylic polish
1 packing list
1 purchase registration-
card
1 Green Bias control link
(use with select gryphon power
amplifiers)
If anything is missing or dam-
aged, please contact your
Gryphon dealer immediately.
Installation
In order to minimize any possi-
ble risk of electrical interfer-
ence, do not place the preampli-
fier directly above or below
poweramplifiers.
Advise
ALWAYS turn the preamplifier
on, BEFORE turning on the
power amplifier.
ALWAYS turn the power amplifi-
er off, BEFORE turning off the
preamplifier.
Rear panel con-
nections
Make sure that the power sup-
ply is turned off, before making
any connections.
Three balanced XLR inputs
marked INPUT 1, INPUT 2 and
INPUT 3 are provided. INPUT 4,
TAPE IN and TAPE OUT use
single-ended RCA connectors.
Connect your signal sources to
the appropriate sockets.
Two sets of balanced XLR out-
puts marked OUTPUT 1 and
OUTPUT 2 are provided. These
outputs allow easy bi-amping or
multi-room operation.
If you are using a compatible
Gryphon power amplifier, you
may choose to connect the
Green Bias control link for auto-
matic regulation of Class A bias
to the socket marked BIAS
CONTROL on the preamplifier
and on the power amplifier.
10
To Next Page
Loading...
Need help?
General
